5 Best CNC Router For Small Shop, July(2024)

Here is my list of Best CNC Router for Small Shop.

The good thing is that all the CNC Router in this list are easily available.

So, if you are looking Small Shop CNC Router for Woodworking, Overall, Beginner friendly, Budget then you will find it useful.

Let’s dive right in…,

Recommended Reading:
Top CNC Routers for all categories.

Best CNC Router for Small Shop

#1 Ortur Laser Master 2 (Best Overall) 

Features & Specs

  • Carving Area: 400 x 430 mm
  • Carving Speed: 3000 mm/ Min
  • Laser Wave Length: 445 ± 5nm
  • Adapter power: 36 W, 12 V & 3A
  • Item Weight: 8.83 pounds
  • Motherboard: 32 bits motherboard with 32Bits MCU
  • Firmware: Ortur Laser Master Firmware
  • OS: Windows, MAC OS and Linux
  • Machine power: LU1-2: 7W; LU1-3: 15W; LU1-4: 20
  • Image size: No Limit
ORTUR Laser Engraver
ORTUR Laser Engraver.

The Ortur laser master 2 CNC machine is a laser engraving machine that allows you to do DIY laser marking on a variety of metals, plastics, and other materials…

The Bad

Most people have problems with the motherboard of this machine.

Does not work well or stops working after a few days of doing it.

So, check everything before you buy…

The Good

This CNC machine features a 32-bit motherboard and a wide engraving area of 400x430mm.

This engraving machine, which supports a baud rate of 921600, can process up to 32 commands.

Also, this machine can engrave at a rate of roughly 3000mm/min.

Since the mainboard contains a G sensor, this CNC machine has a high level of safety protection.

If there is any unexpected movement on the board, the system recognises it and turns off the laser.

Furthermore, if you keep working on laser engraving but forget to operate the machine, the motor will finally shut down to prevent a fire.

If the computer shuts down or the USB cable is unplugged, the laser engraver comes to a stop and prevents fire.

Software and functionality
Laser GRBL software is included with this CNC machine, which is very easy to use.

This machine allows you to obtain exact engraving and you can work more accurately with this laser machine.

What do I love most?

The best thing about this Ortur laser master machine is that it has advanced firmware that makes it faster, smarter, more precise, and easier to use.

It’s a handy tool with a lot of capabilities..

Quick info


  • Exceptional quality.
  • It has nice efficiency.
  • Suitable software.


  • Operation requires a connection to a computer.
Cutting wood piece
Cutting wood piece.

#2 3 Axis Desktop DIY Mini CNC (Best Budget)

Feature & Specs

  • Dimensions: 40x33x24cm
  • Stepper motor: Nema17 42 stepper motor 34MM,1.33A,0.25N.M
  • Material: Aluminum Alloy
  • Control system: grblcontrol, USB interface
  • Drill bits: 10pcs tip 0.1mm ,20 degree,diameter3.175mm.
  • Spindle parameters: 775 spindle motor (12-36V) 24V:10000r/min
  • Item Weight: ‎16.08 pounds
  • Material: ‎Aluminum
  • Working area: 30x18x4.5cm
  • Frame size: 40x33x24cm
  • Software: GRBL controller, UniversalGcodeSender
CNCTOPBAOS 3 Axis Desktop DIY.

With this 3 axis CNC router for small shops, you can do your own milling, engraving, and carving on a variety of materials.

The Bad

This machine doesn’t work with hard material.
This 3 axis 3018 Router does not work well on hard metal or jade.

The Good

Built quality and assembly
The frame and fixed parts of this machine are made of aluminum and Bakelite.
Easy assembly instructions are included with this desktop CNC.

Controller and functionality
This machine comes with a GRBL control board which controls a working area of 30x18x4.5cm.

This CNC controller machine’s frame dimensions are approximately 40x33x24cm.

All types of plastics, soft aluminium, woods, acrylics, PVC, PCB, and other materials are engraved with the CNC 3018 Pro.

The engraver, on the other hand, is not allowed to cut or engrave hard metal, jade, or other hard materials.

This CNC router machine has a 775 spindle motor with 24V and 36V for 7000 and 9000 rotations per minute, respectively.

This machine has a 34mm fuselage length and a current of 1.33A with a torque of 0.25N/M.

Windows XP SP3, Linux, Windows 7, and Windows 8 are all compatible with this CNC machine.

This kit includes a 4GB USB flash drive containing GRBL software and an English user manual.

What do I love the most?

This machine is capable of working with softer materials such as aluminium, copper, and other metals.

But you can learn and do mork work with softer material at a simple cost.

Quick info


  • It contains GRBL software.
  • Easy to assemble.


  • It does not work well with hard material.

#3  BobsCNC Evolution 3 (Best for WoodWorking)

Features & Specs

  • Item Weight: ‎26 pounds
  • Product Dimensions: ‎25 x 19 x 25 inches
  • Color: Baltic Birch
  • Frame material: Rigid laser cut
  • Working area: 400 x 200 x 80 mm
  • Voltage: 115 Volts
  • Wattage: 600 watts
BobsCNC Quantum Mini
BobsCNC Quantum Mini.

BobsCNC Evolution 3 is suitable for both beginners and experts. It implies that everyone can handle it.

Lets know about this tool in detail..

The Bad

This cnc machine makes little noise.

The Good

This CNC router is lightweight and easy to put together. It means it’s quite easy to use and transport.

Software and function
An Arduino-based microprocessor can be used to operate this CNC machine.

It also comes with a USB port for convenient connectivity.

This CNC router machine is compatible with Windows, Raspberry Pi, OSX, and Linux.

Engraving area
It’s a fantastic CNC router with superb precision and speed, reaching over 30000 rpm.

The E3 CNC router has a cutting area of 15.3″ x 17.7″ and it is designed to cut wood and plastics.

The E3 is a 3-axis CNC machine that can carve out forms, engrave, and route relief carvings.

The kit has been laser cut for precision and is sturdy and solid.

What do I love the most?

You will never disappoint with this adaptable CNC router machine with a wide range of applications.

It’s a fantastic CNC for learning about CNC or getting started with a new machine quickly.

This machine is designed for woodworking only..

Quick info


  • Designed for woodworking.
  • It is compatible with Windows, Raspberry Pi, OSX, and Linux.
  • It is lightweight and convenient.


  • Little loud.

#4  SainSmart Genmitsu 3018-PROVer (Best for Beginners)

Features & Specs

  • Effective Engraving Area: 260 x 155 x 35mm(10.2 x 6.1 x 1.4”)
  • Frame Size: 400 x 330 x 240mm(15.7 x 13.0 x 9.4”)
  • Frame Material: Aluminum
  • Z-Axis Component Material: ABS
  • Spindle: 775 motor, 12V~24V, 10000 RPM;
  • Rated power: 60W; Maximum power: 120W
  • Step Motor: 1.3 A, 12V, 0.25 Nm torque (2.2 in-lb)
  • Drill Bits: Tip 0.1 mm, 20 degrees, Diameter 3.175 mm
  • Supported OS: Windows XP, Windows 7 32/64 bits, Windows 8, Windows 10, Linux, MAC OS
  • Software: Grbl control(Candle)
Genmitsu 3018-PROVer
Genmitsu 3018-PROVer.

This SainSmart 3018-PROVer is simple and easy to use. This pre- assembled tool takes 30 minutes to put together according to the manufacturer.

The Bad

Produce dust
Some parts produce a  little amount of dust.

If there is excess dust in your machine, then you can use a dust collector.

The Good

Built quality
This CNC router machine has an oxidised blue appearance and an all-aluminum body which looks great.

The machine’s increased stability enables milling a wide variety of materials easier and less messy.

Optocouplers decrease signal noise and protect your mainboard from hard stops without causing harm, resulting in more consistent projects and longer life.

With the 1.8-inch display, you can now take immediate control of the CNC machine.

It also has an emergency control stop that is immediately accessible for a quick shutdown.

Also it has a safety design that includes 5mm acrylic baffles that prevent dust, wood and other cutaway materials from entering the machine.

You can safely observe the entire engraving process in detail.

Software and functionality
This CNC router machine has a 1.8″ LCD display with an offline controller that allows for clear reading and comprehensive control of the CNC router machine.

This machine comes with CAD/CAM software that allows you to design and transform your ideas into GCode that the router can read and operate.

You have an option to choose any software like Carveco, Fusion360 or Easel.

You can ask for help from Sainmart’s User Guide..

What do I love the most?

This is for you if you want to learn a new skill, work on an artwork project, create a DIY gift, or establish a small business.

Pre- assembled
This CNC router is unique in that it comes with a pre-assembled desktop that allows you to assemble the machine in about 30 minutes.

It means this tool takes less time to set up and start. For novices, this machine is ideal.

Quick info


  • It has a quiet operation and provides good performance.
  • This tool comes with a safety design.
  • Upgraded mainboard.
  • Offline controller.


  • Some components produce little bit of dust.

#5 Genmitsu PROVerXL 4030 (Best Under 1000)

Features & Specs

  • Cutting area: 400 x 300 x 110 mm
  • Assembly: Semi-assembled
  • Frame: Aluminum
  • Spindle: 300 W 12,000 RPM
  • CAM/control software: Candle, Carveco Maker (included), Easel
  • Machine footprint: 641 x 755.5 x 580mm
  • Rated power: 600 W, 7A, 0-48V
  • Step motor: Nema 23 (2-phase, 3A)
  • End mills: Nano Blue Coat Flat end mill set (1/8” shank, cutting edge diameter 0.8-3.0mm), V-shape engraving bits (1/8” shank, cutting edge diameter 0.2mm, 30 Degrees)
  • OS: Carveco Maker: Windows 7 and newer, Candle: Windows, Linux, MAC OS
Genmitsu CNC Router Machine
Genmitsu CNC Router Machine.

When it comes to improving your skill or progressing to the next level, the Genmitsu 4030 is unmatched.

SainSmart is more than doubling the workable area and broadening the applicability of this machine with a new version, the Genmitsu ProverXL 4030.

This new big CNC machine, which promises a “fast and straightforward setup,” costs less than $1,000.

The Bad 


It’s not silent because the router has a high pitch and makes a noise when they start and stop depending on the material you’re cutting.

The structure of the frame is quite strong.

When a strong load is applied to the z-axis, there appears to be some vibration and makes noise.

It can be reduced by slowing down the plunge speed.

The Good

Built quality

The PROVerXL, a large new benchtop CNC router from SainSmart, has a working volume of 400 x 300 x 110 mm.

It is straightforward to assemble and use, according to the manufacturer.

Yes it is but not for all, because I am one of them who took more time to put together this pre-assembled kit.

Software And function
The Genmitsu ProverXL 3040 comes with software that allows you to be creative.

The ProverXL 3040 features a fixed work bed  and a gantry that rolls along a C-beam frame.

Dual Nema 23 stepper motors drive leadscrews, which move the gantry in the Y-axis.

Physical control buttons for job start, stop, and rotational speeds, as well as machine lock and unlock and a safety shutoff, are included in this new kit.

The ProverXL 4030 operates on the open-source GRBL V1.1 firmware,which means it should be compatible with a wide range of CAM and control software.

This tool can make it much easier to integrate ProverXL into existing workflows.

It only works with the most minimal settings.

The ProverXL 3040 comes equipped with a 300-watt SainSmart spindle that spins at 12,000 RPM.

It works well with a wide range of materials, including wood, MDF, plastics, foams, vinyl, and aluminium, for cutting, drilling, and carving.

DeWalt DWP611 has an extra spindle bracket.

This kit allows you to increase the size of their work table and handle big projects.

Upgraded & Included accessories

  • Dust shoe.
  • Aluminum spoilboard.
  • control box and drive system.
  • Beefy C-BEAM Frame.
  • Precision NEMA 23 stepper motors.
  • High Power Spindle.
  • Adapter for Dewalt DWP611. 
  • XYZ axis limit switches.
  • Emergency stop switches.
  • Speed control.
  • Z-probe and more.

What do I love the most?

This tool has upgraded features.
You will have a control button to start and stop, and rotational speeds, as well as machine lock and unlock. 

And most important a safety shut off will make your work easy.

Which is very helpful for beginners..

So, everything you are getting at a simple price..

Quick info


  • Large work area.
  • It works with wide range of materials.
  • It has safety button.


  • Makes noise.


The article concludes by presenting the best CNC routers for small shops, taking into account elements like size, functionality, and pricing. These machines are perfect for small-scale woodworking operations in workspace-constrained settings because they provide precise and effective cutting capabilities.

Leave a Comment